2015

Compositional disorder effects in the spectra of Nd3+ in Y3ScxAl5-xO12 ceramics

Authors: 
V. Lupei, A. Lupei, S. Hau, C. Gheorghe, F. Voicu
Year: 
2015

Advanced NLO Crystals for Efficient Blue Laser Sources Based on SHG Processes

Authors: 
L. Gheorghe, A. Achim, F. Voicu, G. Stanciu
Year: 
2015

Laser Ignition of an Automobile Engine by a High-Peak Power Nd:YAG/Cr4+:YAG Laser

Authors: 
N. Pavel, T. Dascalu, M. Dinca, G. Salamu, N. Boicea, A. Birtas
Year: 
2015

Compositional dependence of optical properties of Sm3+-doped Y3ScxAl5-xO12 polycrystalline ceramics

Authors: 
C. Gheorghe, A. Lupei, S. Hau, F. Voicu, A. M. Vlaicu, M. Enculescu, and L. Gheorghe
Year: 
2015

Optical properties of Sm3+: CLNGG polycrystalline ceramics

Authors: 
S. Hau, C. Gheorghe, A. Lupei, and L. Gheorghe
Year: 
2015

Novel Thin Disk Lens Shaped Composite Nd:YAG/YAG Ceramic Laser

Authors: 
T. Dascalu, A. Ionescu, G. Salamu, O. Grigore, M. Dinca, F. Voicu, C. Brandus, and N. Pavel
Year: 
2015

Automobile Engine Ignition by a Passively Q-switched Nd:YAG/Cr4+:YAG Laser

Authors: 
N. Pavel, T. Dascalu, M. Dinca, G. Salamu, N. Boicea, and A. Birtas
Year: 
2015

Evaluation of co-doped Lu3+, Nd3+:GdCa4O(BO3)3 single crystal, a potential self-doubling material with emission in green spectral range

Authors: 
C.A. Brandus, L. Gheorghe, A. Achim, G. Stanciu, and T. Dascalu
Year: 
2015

Diode-Pumped Laser Emission from Depressed Cladding Waveguides Inscribed in Nd-doped Media by Femtosecond Laser Writing Technique

Authors: 
G. Salamu, N. Pavel, T. Dascalu, F. Jipa, and M. Zamfirescu
Year: 
2015

High-Peak Power Passively Q-switched Nd:YAG/Cr4+:YAG Lasers for Successful Ignition of an Automobile Engine

Authors: 
N. Pavel, G. Salamu, O. V. Grigore, M. Dinca, T. Dascalu, N. Boicea, and A. Birtas
Year: 
2015

Upconversion luminescence in CaSc2O4 codoped with Er3+ and Yb3+

Authors: 
A. Stefan, S. Georgescu, O. Toma, and C. Matei
Year: 
2015

Deposition and surface modification of thin solid structures by high-intensity pulsed laser irradiation

Authors: 
Popescu, AC; Ulmeanu, M; Ristoscu, C; Mihailescu, IN
Year: 
2015
DOI: 
http://dx.doi.org/10.1016/B978-1-78242-074-3.00012-X

Influence of the scanning conditions on the characteristics of the nanostructures fabricated by laser ablation in liquid

Authors: 
Nikolov, AS; Nikov, RG; Nedyalkov, NN; Koutzarova, TI; Alexandrov, MT; Karashanova, DB; Ristoscu, C; Mihailescu, IN
Year: 
2015
DOI: 
http://dx.doi.org/10.1117/12.2175651

Humidity sensors applicative characteristics of granularized and porous Bi2O3 thin films prepared by oxygen plasma-assisted pulsed laser deposition

Authors: 
Tudorache, F; Petrila, I; Condurache-Bota, S; Constantinescu, C; Praisler, M
Year: 
2015
DOI: 
http://dx.doi.org/10.1016/j.spmi.2014.11.022

Structural and biological evaluation of lignin addition to simple and silver-doped hydroxyapatite thin films synthesized by matrix-assisted pulsed laser evaporation

Authors: 
Jankovic, A; Erakovic, S; Ristoscu, C; Mihailescu, N; Duta, L; Visan, A; Stan, GE; Popa, AC; Husanu, MA; Luculescu, CR; Srdic, VV; Janackovic, D; Miskovic-Stankovic, V; Bleotu, C; Chifiriuc, MC; Mihailescu, IN
Year: 
2015
DOI: 
http://dx.doi.org/10.1007/s10856-014-5333-y

Collimated electron beam accelerated at 12 kV from a Penning discharge

Authors: 
Toader, D; Oane, M; Ticos, CM
Year: 
2015
DOI: 
http://dx.doi.org/10.1063/1.4905683

Characterising dust in JET with the new ITER-like wall

Authors: 
Flanagan, JC; Sertoli, M; Bacharis, M; Matthews, GF; de Vries, PC; Widdowson, A; Coffey, IH; Arnoux, G; Sieglin, B; Brezinsek, S; Coenen, JW; Marsen, S; Craciunescu, T; Murari, A; Harting, D; Cackett, A; Hodille, E
Year: 
2015
DOI: 
http://dx.doi.org/10.1088/0741-3335/57/1/014037

Characterization of Nano-Scale Protective Oxide Films: Application on Metal Chemical Mechanical Planarization

Authors: 
Karagoz, A; Craciun, V; Basim, GB
Year: 
2015
DOI: 
http://dx.doi.org/10.1149/2.0151412jss

Light-assisted evaporation induced self-assembly: an efficient approach toward ordered carbon materials

Authors: 
Ghimbeu, CM; Soprony, M; Sima, F; Vaulot, C; Vidal, L; Le Meins, JM; Delmotte, L
Year: 
2015
DOI: 
http://dx.doi.org/10.1039/c4ra14246b

Laser micro-patterning of biodegradable polymer blends for tissue engineering

Authors: 
Paun, IA; Zamfirescu, M; Mihailescu, M; Luculescu, CR; Mustaciosu, CC; Dorobantu, I; Calenic, B; Dinescu, M
Year: 
2015
DOI: 
http://dx.doi.org/10.1007/s10853-014-8652-y

Judd-Ofelt analysis of Tm3+ in La3Ga5.5Ta0.5O14 ceramic with granular structure

Authors: 
Georgescu, S; Toma, O; Matei, C; Voiculescu, AM; Stefan, A
Year: 
2015
DOI: 
http://dx.doi.org/10.1016/j.jlumin.2014.08.037

Meet the Editorial Board Member Prof. Mihail Lucian Pascu

Authors: 
Pascu, ML
Year: 
2015

Contribution to the theoretical investigation of electron and photon interaction with carbon atom and its ions

Authors: 
Stancalie, V
Year: 
2015
DOI: 
http://dx.doi.org/10.1088/1742-6596/576/1/012010

PERIODICITY PROPERTY WITH APPLICATIONS TO THE MODELING OF INTERACTIONS BETWEEN VERY INTENSE LASER BEAMS AND ELECTRONS OR ATOMS

Authors: 
Popa, A
Year: 
2015

QUANTITATIVE ANALYSIS OF LASER SURGICAL SMOKE: TARGETED STUDY ON SIX TOXIC COMPOUNDS

Authors: 
Bratu, AM; Petrus, M; Patachia, M; Matei, C; Popa, C; Banita, S; Dumitras, DC
Year: 
2015
Syndicate content